Oil additives play a major role in the life of an engine. The oil pump depends on clean and smooth oil flow. Additives keep the oil clean and stable. They also protect engine parts from wear. Some additives improve lubrication and reduce friction. Others may affect oil thickness. The oil pump needs the right oil to work well. Wrong additives can block the small oil passages. This can lead to poor performance or damage. It is important to understand how each additive works. Careful use from Auto Repair in Littleton, Co like companies like the EAS Tire & auto keeps the pump running strong.
Understanding How Oil Additives Work
Additives mix with base oil to change its properties. They help oil stay thick under heat. They stop rust and form a shield on metal parts. The right blend can make the oil flow smooth. The oil pump moves oil through narrow spaces. Additives help oil resist break down. A clean flow lets the pump move oil easily. Without the help of additives, oil can fail early. This may lead to dry spots or noise. The correct mix supports smooth flow and steady pressure.
Benefits of Using the Right Additives
Good oil additives help the oil pump last longer. They keep the oil clean and reduce sludge. They also stop foam from forming. Foam can make oil flow uneven. Additives form a film that guards against friction. The oil stays stable and clear for long use. This helps the pump deliver steady pressure. The pump rotor and gears move freely. The result is smooth power transfer and quiet motion. The engine runs easy when oil and additives work well together. Proper care from EAS Tire & auto brings longer pump life and less repair.
Risks of Using the Wrong Additives
Some additives may not help the oil pump. They can make the oil too thick or too thin. Thick oil slows flow through the pump. Thin oil fails to protect parts. Wrong additives may build up dirt inside the pump. This can lead to clogging and heat. The pump may work harder and wear out faster. Some chemical blends may react and create sludge. That sludge may block filters and passages. Poor additive use can also lower oil pressure. Care is needed when adding any chemical change to the oil.
Choosing and Maintaining the Right Balance
Always select oil that meets engine needs. The label should show the right blend. Each engine design needs a certain flow rate. The oil pump must move that oil with ease. A balanced mix of additives helps keep oil flow stable. It also helps control heat under high load. Clean oil means clean pump gears and bearings. Change oil at regular times for best results. Avoid mixing brands or types. Keep the system free from old residues. Use care when adding new additives to stay safe and maintain pump health.
